DIY No Sew Curtains

Our home has high ceilings with a lot of windows so outfitting all the windows with curtains is a task in and of itself.  Luckily, the previous owners left the window blinds in one of the guest rooms and the master and also left most of the curtains in the living room and kitchen.

Curtains we inherited from the previous owners
Curtains we inherited from the previous owners

Although the curtains aren’t really our style, we were really glad to have them because it saved us spending a lot of money up front just on curtains.  Two windows still in need of curtains were in our dining room area.  Since we have tall windows throughout the house, we needed curtains at least 96 inches long which are difficult to find in the store.  We basically decided we would need to order curtains online but just could not find something we liked that wasn’t super expensive.  In the end, Pinterest came to the rescue with tons of links to DIY curtain ideas.  Even though I can sew, I do not have a sewing machine and wanted a quick DIY project to complete.  I was skeptical about doing a no sew project, but I can say I am happy with the results.  I ended up combining different tutorials from Pinterest to make these no sew curtain panels.

Here are the materials you will need:

  • Fabric (I ended up ordering 6 yards)
  • 1 Roll of Stitch Witchery (I purchased mine from JoAnn’s Fabrics)
  • Iron and Ironing board
  • Damp Cloth
  • Quilting Pins
  • Scissors
  • Curtain Clip Rings (optional; I purchased mine from Target)
  • Curtain Rod

My first step was to choose the fabric.  I just adore all of April Rhodes‘ designs and, previously, my Mom made us some throw pillows from April’s Arizona fabric collection.  Here are some of the pillows below


For the curtains, we wanted something that would bring a little bit of color and warmth to the room and, since we loved the fabric for our pillows so much, we decided to use Wandering Lands from April’s Wanderer collection this time.  The perk of making your own curtains is being able to choose whatever fabric/design you want.  I ordered a few extra yards to be on the safe side.

Once the fabric arrived, I set up the ironing board and tacked down the side hems of the curtains.  I did a 1 inch hem on the sides and did a 2.5 inch hem for the top.  Even though we ended up using curtain clip rings to hang the curtains, I made the top hem big enough so if we want to insert a rod into the curtain we have the option.


After setting up my hem, I ironed on the stitch witchery.  The directions said to use a damp cloth and to press the iron down for 10 seconds on each side.  I believe there are other types of no sew hem methods that do not require the damp cloth but the stitch witchery was one of the cheaper options at the store.  I was skeptical about whether the stitch witchery would work or not but was pleasantly surprised with the results.  There were only a few areas I needed to go over more than once and my advice is to let it cool down all the way before checking to make sure it is secure and, although a little tedious, make sure you iron both sides of the fabric.


After I finished ironing all the hems, I went ahead and ironed the curtains too just to get some wrinkles out.  Then, they were ready to go!  I attached the curtain clips and here is the final result.


Also, since I had a few extra yards left over, I made a little curtain for our front door too.


That’s it!  Super simple.  I’m very happy with the outcome of this project and will probably never buy curtains again. I did not line the back of these because I wanted the area to still get a lot of light, but it would probably be pretty easy if  you are interested in a thicker curtain.  The best part?  These curtains cost less than the ones we would have purchased online and we have the custom look we wanted!

Living Room Renovation: Part 2

As I mentioned yesterday, our living room and hallway floor renovation did not go as smoothly or as quickly as we planned.  Since our floor reno came to a dead halt, I had some time and decided to tackle our fireplace renovation.  Our fireplace came to us with an ugly faux stone façade which was hiding the brick underneath.  Our home is a craftsman home and the stone did not fit the character. Here’s a look at the fireplace the day we viewed the home for the first time:

MLS listing photograph
MLS listing photograph

Luckily for us, the person who placed the stone on the fireplace did a pretty lousy job and it basically came right off, but once again we weren’t sure what we would find underneath…

Getting ready to chisel away the stone
Yikes, again!

So obliviously there was some fire damage to the bricks at some point in time.  In case you hadn’t guessed it from this photo, our fireplace is not a working fireplace.  My next step here was to clean the fireplace as well as I could.  Then, I put my experience from repointing at Fort Pulsaski in the summer of 2011 to the test and repointed our fireplace.  My original plan was to repoint the entire fireplace but that did not last long. Chiseling out old mortar is a very messy process especially inside and the old mortar was like soot and got everywhere!  James convinced me to only do what was 100% necessary.  Here is what it looked liked after repointing:

imageIt still looked pretty scary, but got much better after I primed it.

imageAround this time, we thankfully made progress on the floor.  Our realtor, Gina Calvin’s husband and son, John and Ben Calvin, have a renovation business and were able to help get us out of our floor predicament and completed the floor install for us.  We were sooo grateful for their help and they did a fantastic job installing the new pieces of wood floor.

Here is what the floor looked like after the new pieces were installed.image

So now that we had our install completed we were able to have the floors sanded and stained.  In order to complete this process we had to be out of the home for basically a week.

We had a couple of weeks in between the time of the floor install and sanding so we decided to go ahead and paint our living room.  The previous color was a blue shade.  We knew we wanted to paint the living room a grey color and after much debate decided to go with Stonington Grey by Benjamin Moore.  Let me just say Benjamin Moore may be more on the expensive side as far as paint goes but it is definitely worth every penny!  The paint lasts forever and a little goes a long way.  My dad came to help us paint and even he was very impressed with the quality of the paint.  Here is a photo of the room just after we painted and with the newly sanded floors.

imageAhh, we were looking so much better!

John was able to cut and even out some of the bricks on the fireplace for us.  Since, I didn’t repoint a lot of the mortar in that area, some of the bricks came loose, but I was able to re-stack/lay the bricks back into place with new mortar.  Here is what it looked like after I completed the process.


I still need to paint the hearth, but I think it looks much better than the stone.

And finally, our completed floors!


Yay! We waited 2 weeks to move our furniture and rugs into the living room (they said one week, but we decided to wait 2 just to be on the safe side).  We finally feel more at home now that we can actually use our living room!